The seal sets should be used together with suitable guide elements. The fitting areas must be cleaned and trimmed carefully before fitting. When fitting the PTFE Glide Seal sets, the O-ring should be placed in the groove first. In the case of inside sealing applications the sealing ring must then be pressed into a kidney shape with fitting pliers and inserted in its groove. In the case of outside sealing applications it must be expanded with a fitting sleeve and expansion mandrel and inserted in its groove.

A divided fitting area should be provided for rod seal sets and corresponding wipers up to a diameter of 30 mm. The sealing element should be restored to its original shape with a suitable calibration sleeve or calibration mandrel. The necessary fitting and calibration tools can be delivered on request.